<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>中科因仑“3+1”工程特种兵精英论坛 - PLC工控</title>
    <link>http://bbs.enlern.com/forum-160-1.html</link>
    <description>Latest 20 threads of PLC工控</description>
    <copyright>Copyright(C) 中科因仑“3+1”工程特种兵精英论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 17 May 2026 22:18:42 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://bbs.enlern.com/static/image/common/logo_88_31.gif</url>
      <title>中科因仑“3+1”工程特种兵精英论坛</title>
      <link>http://bbs.enlern.com/</link>
    </image>
    <item>
      <title>力德PLC在全液压轮胎压路机控制中的应用</title>
      <link>http://bbs.enlern.com/thread-9036-1-1.html</link>
      <description><![CDATA[0   概  述[/backcolor]
       在现代各类建筑基础、路面和路基的压实中，轮胎压路机具有不可代替的优越性，其充气轮胎除有垂直压实力外，还有水平压实力，这些力的作用加上胶轮弹性所产生的一种“揉搓作用”结果就产生了极好的压实效果。同时，轮胎间的相互重叠能产生 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 09:20:02 +0000</pubDate>
    </item>
    <item>
      <title>设计PLC控制系统的具体步骤【恢复】</title>
      <link>http://bbs.enlern.com/thread-9035-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 09:15:22 +0000</pubDate>
    </item>
    <item>
      <title>PLC计时及仿真问题</title>
      <link>http://bbs.enlern.com/thread-9034-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 09:07:03 +0000</pubDate>
    </item>
    <item>
      <title>单片机代替PLC，自动喷涂喷漆工控板，变频器行程控制</title>
      <link>http://bbs.enlern.com/thread-9033-1-1.html</link>
      <description><![CDATA[变频器行程控制器[/backcolor]
一、变频器行程控制器概述
在大型自动化设备运行中，常常需要对一些运动量进行更精密的控制，比如用于喷漆的设备。控制喷头的电机的运动轨迹靠一个精密导电塑料电位器作为传感器，见图1，电位器转动后变化的阻值分压后得到的电压值作为采 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 09:03:49 +0000</pubDate>
    </item>
    <item>
      <title>PLC构架设计</title>
      <link>http://bbs.enlern.com/thread-9032-1-1.html</link>
      <description><![CDATA[FPGA主要负责PLC基本逻辑运算功能块运行，单片机负责通信等复杂指令，可以有效提高PLC功能块运行速度，技术难度比较大。现公司开发的PLC都属低端产品，价格便宜，但功能块跑起来特别慢，单片机的解释执行能力还是有限，目前项目还没有开始，想和大家讨论一下关于MCU和F ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:58:01 +0000</pubDate>
    </item>
    <item>
      <title>西门子PLC的 冷启动、暖启动、热启动</title>
      <link>http://bbs.enlern.com/thread-9031-1-1.html</link>
      <description><![CDATA[[/td][/tr]

[/table]]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:55:59 +0000</pubDate>
    </item>
    <item>
      <title>远比三菱FX、GX软件好用的PLC编程调试软件</title>
      <link>http://bbs.enlern.com/thread-9030-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:53:02 +0000</pubDate>
    </item>
    <item>
      <title>三菱PLC的局限与超越</title>
      <link>http://bbs.enlern.com/thread-9029-1-1.html</link>
      <description><![CDATA[一、三菱PLC的局限[/backcolor]
        三菱PLC是较早进入中国市场的PLC之一，在中国市场占有较大的份额，国内很多人都曾研究过或还在研究三菱的PLC，但大部分的研究局限在指令描述、通讯命令和文件结构上。其结果是国内出现了很多的三菱的仿真PLC，真是五花八门，各种 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:49:35 +0000</pubDate>
    </item>
    <item>
      <title>单板PLC与传统PLC对比</title>
      <link>http://bbs.enlern.com/thread-9028-1-1.html</link>
      <description><![CDATA[所谓单板PLC.就是用最简化的单片机系统集成了IO电路，在一片PCB上实现PLC的功能，对比传统的PLC与单板PLC，它们的区别如下：[/backcolor]
　　　　[/backcolor]
　　　　1，单板PLC无外壳，所有电子元件集在一块板上，而传统PLC有外壳，一般的小型传统PLC电路板分成三块 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:48:35 +0000</pubDate>
    </item>
    <item>
      <title>PLC控制系统设计的七个步骤</title>
      <link>http://bbs.enlern.com/thread-9027-1-1.html</link>
      <description><![CDATA[设计一个PLC控制系统需要以下七个步骤： [/backcolor]
　　 1. 系统设计与设备选型 [/backcolor]
　　 a. 分析你所控制的设备或系统。PLC最主要的目的是控制外部系统。这个系统可能是单个机器，机群或一个生产过程。 [/backcolor]
　　 b. 判断一下你所要控制的设备或系 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:47:38 +0000</pubDate>
    </item>
    <item>
      <title>plc继电器输出和晶体管的区别</title>
      <link>http://bbs.enlern.com/thread-9026-1-1.html</link>
      <description><![CDATA[继电器输出：[/backcolor]
优点是不同公共点之间可带不同的交、直流负载，且电压也可不同，带负载电流可达2A／点；但继电器输出方式不适用于高频动作的负载，这是由继电器的寿命决 定的。其寿命随带负载电流的增加而减少，一般在几十万次至Jl百万次之间，有的公司产品可 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:45:30 +0000</pubDate>
    </item>
    <item>
      <title>三菱PLC梯形图转51单片机HEX软件 支持AD/DA GX在线监控 发脉冲</title>
      <link>http://bbs.enlern.com/thread-9025-1-1.html</link>
      <description><![CDATA[试用版V1.1下载：[/backcolor]


一、    软件说明：[/backcolor]
本软件功能是将三菱FX2N的PLC程序转换成51单片机HEX文件的程序，本软件有相当完善的出错与提示检测功能（元件范围检测，支持的指令检测，是否FX2N的程序文件检测，是否FX2N软元件内存数据文件检测等等） ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Tue, 07 Apr 2015 08:38:05 +0000</pubDate>
    </item>
    <item>
      <title>PLC输出电路中对驱动电路和负载器件的保护措施</title>
      <link>http://bbs.enlern.com/thread-8609-1-1.html</link>
      <description><![CDATA[在输出电路中往往需要注意对驱动电路和负载器件的保护：    1）对于继电器这类电感性负载，必须安装火花抑制器。    2）对于容性负载，应在信号输出负载线路中串联限流电阻。电阻阻值应确保负载承受的瞬时电流和电压被限制在额定值内。    3）在用晶体管输出直接驱动指 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:55:03 +0000</pubDate>
    </item>
    <item>
      <title>PLC的几个主要特点使PLC在工控行业长期立于不败之地</title>
      <link>http://bbs.enlern.com/thread-8608-1-1.html</link>
      <description><![CDATA[1）高可靠性1）所有的I/O 接口电路均采用光电隔离，使工业现场的外电路与PLC内部电路之间电气上隔离。2）各输入端均采用R-C滤波器，其滤波时间常数一般为10~20ms。3）各模块均采用屏蔽措施，以防止辐射干扰。4）采用性能优良的开关电源。5）对采用的器件进行严格的筛选 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:52:12 +0000</pubDate>
    </item>
    <item>
      <title>PLC工作环境(应用中应注意的问题)</title>
      <link>http://bbs.enlern.com/thread-8607-1-1.html</link>
      <description><![CDATA[1． 温度
　　PLC要求环境温度在0~55℃，安装时不能放在发热量大的元件下面，四周通风散热的空间应足 够大，基本单元和扩展单元之间要有30mm以上间隔；开关柜上、下部应有通风的百叶窗，防止太阳光直接照射；如果周围环境超过55℃，要安装电风扇强迫通风。
　　2． 湿 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:51:21 +0000</pubDate>
    </item>
    <item>
      <title>PLC的用户程序执行过程简介</title>
      <link>http://bbs.enlern.com/thread-8606-1-1.html</link>
      <description><![CDATA[对于用户来说，在编写用户程序或选择设备时，必须清楚下面介绍的三个阶段，即用户程序执行过程的原理。PLC采用集中处理的方法，即对输入扫描信号、执行用户程序和输出刷新都采用集中分批处理的工作方式。（1）输入扫描  在这一阶段中，PLC以扫描方式读入所有输入端子上 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:50:22 +0000</pubDate>
    </item>
    <item>
      <title>PLC容量是怎么划分的，举例说明</title>
      <link>http://bbs.enlern.com/thread-8605-1-1.html</link>
      <description><![CDATA[大致可分为“小”、“中”、“大”三种类型。a.小型PLCI/O点总数一般小于或等于256点。其特点是体积小、结构紧凑，整个硬件融为一体，除了开关量I/O以外，还可以连接模拟量I/O以及其他各种特殊功能模块。它能执行包括逻辑运算、计时、计数、算术运算、数据处理和传送、 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:49:20 +0000</pubDate>
    </item>
    <item>
      <title>PLC现场安装和维护的注意事项</title>
      <link>http://bbs.enlern.com/thread-8604-1-1.html</link>
      <description><![CDATA[1引言可编程控制器（PLC）是一种新型的通用自动化控制装置，它将传统的继电器控制技术、计算机技术和通讯技术融为一体，具有控制功能强，可*性高，使用灵活方便，易于扩展等优点而应用越来越广泛。但在使用时由于工业生产现场的工作环境恶劣，干扰源众多，如大功率用电 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:48:25 +0000</pubDate>
    </item>
    <item>
      <title>PLC的发展、基本结构、配置、应用</title>
      <link>http://bbs.enlern.com/thread-8603-1-1.html</link>
      <description><![CDATA[在自动化控制领域，PLC是一种重要的控制设备。目前，世界上有200多厂家生产300多品种PLC产品，应用在汽车（23%）、粮食加工（16.4%）、化学/制药（14.6%）、金属/矿山（11.5%）、纸浆/造纸（11.3%）等行业。为了使各位初学者更方便地了解PLC，本文对PLC的发展、基本结构 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:46:42 +0000</pubDate>
    </item>
    <item>
      <title>PLC的基本应用</title>
      <link>http://bbs.enlern.com/thread-8602-1-1.html</link>
      <description><![CDATA[最初，PLC主要用于开关量的逻辑控制。随着PLC技术的进步，它的应用领域不断扩大。如今，PLC不仅用于开关量控制，还用于模拟量及数字量的控制，可采集与存储数据，还可对控制系统进行监控；还可联网、通讯，实现大范围、跨地域的控制与管理。PLC已日益成为工业控制装置家 ...]]></description>
      <category>PLC工控</category>
      <author>leixiaofeng</author>
      <pubDate>Sat, 28 Mar 2015 06:45:49 +0000</pubDate>
    </item>
  </channel>
</rss>