中科因仑“3+1”工程特种兵精英论坛

标题: 基于QQ2440开发板移植的u-boot2011.03 [打印本页]

作者: 天道出勤 时间: 2016-5-6 16:43
标题: 基于QQ2440开发板移植的u-boot2011.03
最近移植了u-boot2011.03到QQ2440开发板上，看到坛子里面有人要QQ2440的资料，这里传上来大家共享。
移植完之后支持NAND、NOR双重启动，并能自动识别。
具体请查看代码，不细说。

u-boot代码ourdev_676512WM054V.rar(文件大小:4.18M) (原文件名:u-boot-2011.03.rar)

编译器为arm-linux-gcc 4.3.2

U-Boot 2011.03 (Sep 13 2011 - 20:28:43)

DRAM:  64 MiB
Flash: 2 MiB
NAND:  64 MiB
In: serial
Out: serial
Err: serial
Net: CS8900-0
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x60000, size 0x200000
2097152 bytes read: OK
## Booting kernel from Legacy Image at 30007fc0 ...
Image Name: Linux-2.6.29.4-FriendlyARM
Created:    2011-09-13  13:08:19 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2016516 Bytes = 1.9 MiB
Load Address: 30008000
Entry Point:  30008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.................................................................................................................................. done, booting the kernel.

欢迎光临中科因仑“3+1”工程特种兵精英论坛 (http://bbs.enlern.com/)